Z axis height from the bottom of the workpiece should be material thickness + tool length + 50mm clearance for holding mechanisms.
The machine should be able to machine the full depth of a material with a cutter. As the maximum material thickness is 100mm the Z axis travel should be 250mm minimum.
The maximum material size in X direction is 1220mm. Allowing 40mm either side for clamping this should brings the required travel in X to 1300mm
Y direction will be 1220mm + 80mm for clamping + allowance for tool changer.
According to this image below an ISO20 tool holder is 30mm wide. Allowing a generous 100mm for the tool change brings the total Y axis movement to 1400mm.
http://www.spindel-shop.de/Shop/images/product_images/info_images/iso20-er16.jpg
No comments:
Post a Comment